Handleiding
Je bekijkt pagina 11 van 20
11
3. After positioning your terminal with its screen
facing downwards, lift the monitor and then
align the four fixing screw holes on its
mounting bracket with the hole pattern at the
rear of the terminal as shown in the figure.
4. Insert four #6-32-10L screws into the screws
holes and then tighten them to secure the
mounting bracket.
5. Take the VGA cable out of the package, and
then connect it to your monitor.
6. For TM series users, plug Type-B connector of
USB cable into Type-B USB port of your
monitor to enable touch function. If the
monitor you are using isn’t TM series,
please skip this step.
7. While pushing the VGA cable into cable passages on the left side, also
reserve the enough cable for tilting the monitor.
8. For TM series users, tuck USB cable through the cable passage on the
right side. Reserve the enough cable needed for tilting the monitor.
Please skip this step if USB cable is not available.
Cable Exit
Cable Exit
Bekijk gratis de handleiding van Posiflex LM-3014E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Posiflex |
| Model | LM-3014E |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4244 MB |
