Portacool Apex PACA07001A1 handleiding
Handleiding
Je bekijkt pagina 31 van 98
TROUBLESHOOTING
It is essential to disconnect power by unplugging the power cord from the outlet before attempting
to x any issues with your evaporative cooler. If you are experiencing a problem that is not listed
here, please visit our support page, or contact our Customer Care team for help. Your safety is
our top priority!
Symptom Possible Causes Remedies
Water
droplets
in the air
stream
Dirty evaporative media
does not absorb water
efciently
Gaps between media
pads
Too much water being
delivered to media
1. Clean evaporative media
2. If the problem persists, replace evaporative media.
Make sure the cooler is level. Adjust pads so there are no gaps between
each block.
1. Check spray bar for clogs, clean or replace as necessary.
2. Reduce water ow rate by changing Cooling mode to Eco or Manual
and selecting a lower pump speed.
Insufcient
water ow
or media
wetting
The pump does not
appear to be running
as intended
1. Check spray bar for clogs, clean or replace as necessary.
2. Increase water ow rate by changing Cooling mode to Max Cooling or
Manual and selecting a higher pump speed.
Bekijk gratis de handleiding van Portacool Apex PACA07001A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Portacool |
| Model | Apex PACA07001A1 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 13926 MB |
