Pontec PondoStar LED warm Set 1 Handleiding (88 Pagina's)

Handleiding

- EN -

9

Installation and connection

 B, C

• The unit can be placed submerged or dry.

• For installation above water: Ensure a safety distance of at least 50 cm from combustible material. Fire hazard:

Do not cover the unit!

• Install the transformer at a minimum safety distance of 2 m from the water.

How to proceed:

1. Position the unit such that it does not present a hazard to anyone and the lamps are tilted as desired.

2. Connect the plug of the spotlight connection cable to the socket on the transformer and hand-tighten the union nut.

Commissioning/start-up

NOTE

The unit will be destroyed if it is operated with a dimmer. It contains sensitive electrical components.

 Do not connect the unit to a dimmable power supply.

• Switching on: Plug the power plug into the outlet.

– The unit switches on immediately.

• Switching off: Pull the power plug from the outlet.

Maintenance and cleaning

Cleaning the LED spotlight

If necessary, clean the unit with clear water using a soft brush.

Repair work

The light source (LED) in the LED spotlight cannot be replaced.

Malfunction remedy

Malfunction

Cause

Remedy

Lamp does not light up.

Power supply interrupted

Check power supply

Illuminating power decreasing

Lamp glass soiled

Clean

Water inside the spotlight housing

Seal defective

Check the seal for correct seating and clean

Bekijk gratis de handleiding van Pontec PondoStar LED warm Set 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.