Pontec PondoStar LED Set 1 handleiding
Handleiding
Je bekijkt pagina 9 van 92

-  GB  - 
9 
Installation and connection 
 B, C 
•  The unit can be placed submerged or dry. 
•  For installation above water: Ensure a safety distance of at least 50 cm from combustible material. 
Fire hazard: Do not cover the unit! 
•  Install the transformer at a minimum safety distance of 2 m from the water. 
3.  
0. 
How to proceed: 
1. Position the unit such that it does not present a hazard to anyone and the lamps are tilted as desired. 
2. Connect the plug of the spotlight connection cable to the socket on the transformer and hand-tighten the union nut. 
Start-up 
Attention! Sensitive electrical components. 
Possible consequence: The unit will be destroyed. 
Protective measure: Do not connect the unit to a dimmable power supply. 
Attention! Dangerous electrical voltage. 
Possible consequences: Death or severe injury. 
Protective measures: 
•  Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: 
Isolate the units and installations (switch off and disconnect from the power supply) before reaching into the 
water. 
•  Isolate the unit before starting any work. 
•  Secure the unit to prevent unintentional switching on. 
Switching on: Insert the power plug of the transformer into the socket.  
•  Check the function of the spotlights. 
Switching off: Disconnect the transformer power plug. 
Remedy of faults 
Malfunction Cause  Remedy 
Power supply interrupted  Check power supply  Lamp does not light up 
Bulb defective  Replace bulb 
Lamp glass soiled  Clean Luminosity decreases 
The brightness of the bulb reduces as the 
operating time increases 
Replace bulb 
Water inside the spotlight housing  Seal defective  Check sealing rings and replace, if necessary 
S 
23903-01-14_GA_PondoStar LED-Set9   9 14.01.2014   14:32:06
Bekijk gratis de handleiding van Pontec PondoStar LED Set 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pontec | 
| Model | PondoStar LED Set 1 | 
| Categorie | Niet gecategoriseerd | 
| Taal | Nederlands | 
| Grootte | 8570 MB | 







