Pontec PondoSolar LED Set 3 handleiding
Handleiding
Je bekijkt pagina 7 van 72
- EN -
7
Intended use
Only use the product described in this manual as follows:
• Use of LED spotlights in fountain systems and ponds.
• Use of LED spotlights above water and underwater.
• Operate in accordance with instructions.
• Adherence to the permissible water quality.
The following restrictions apply to the unit:
• Do not use for commercial or industrial purposes.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
Installation and connection
• The LED spotlights can be submerged or installed in a dry position.
• For dry installation, keep a distance of at least 50 cm from any flammable materials.
– Danger of fire: Do not cover the unit!
How to proceed:
B
1. Assemble the fastening set for the solar module.
2. Push the fastening set into the holder on the solar module and fasten the solar module in the ground using the
ground stake.
– Install the solar module so that it is exposed to direct sunlight and align it in relation to the sun to ensure maxi-
mum energy yield.
– Ensure that the connection cable is routed downwards.
3. Connect the connection lines of the LED spotlight and the solar module using the plug and socket.
– Hand-tighten the union nut.
4. Switch on the power supply for the LED spotlights on the switch on the solar module.
– The light sensor integrated in the solar module automatically switches on the LED spotlights at low light (twilight).
5. Install and align the LED spotlights.
Malfunction remedy
Malfunction
Cause
Remedy
LED spotlight does not light up
No connection to the solar module.
• Connect the LED spotlights and the solar
module
• Connect the plug connectors correctly
Switch on the solar module is set to “OFF”
Set the switch to “ON”
The solar module is soiled.
Clean the solar module
Bulb defective
Dispose of the unit
Water inside the spotlight housing
Dispose of the unit
Illuminating power decreasing
Lamp glass soiled
Clean lamp glass
Insufficient sunlight
Align the solar module to the sun.
Short lit period
The integrated rechargeable battery was
charged insufficiently
Align the solar module so that its position in re-
lation to the sun is ideal
The integrated rechargeable battery is used up
Dispose of the unit
Bekijk gratis de handleiding van Pontec PondoSolar LED Set 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pontec |
| Model | PondoSolar LED Set 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7194 MB |
