Point POVCB50GR handleiding
Handleiding
Je bekijkt pagina 12 van 54
MAINTENANCE
12
4) Fig.17, take out the HEPA cover
5) Fig.18, take the filter out and tap it to remove dust. If necessary, you
can rinse it under water.
6) Wash the HEPA cover, the HEPA assembly, the outlet sponge and the
dust chamber in water without detergent and dry them before use. Don’t
use any tools to brush the HEPA fitler paper, otherwise the HEPA filter
will be damaged and filteration will be aected.
7) Fix the HEPA assembly on the chamber cover and make sure the three
salient cubes are stuck in the grooves of the dust chamber.
8) Rotate the HEPA assembly in the direction of the mark on the
chamber cover.
9) Assemble the chamber cover assembly and the dust chamber
according to the mark on the outside.
10) Put the dust chamber assembly into the vacuum cleaner. Firstly
making sure that the chamber is in the right position and then press the
handle of the dust chamber. If there is a click sound it means the
operation is successful.
14
16
15
17 18
Bekijk gratis de handleiding van Point POVCB50GR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POVCB50GR |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3068 MB |
