Point POVC121GR handleiding
Handleiding
Je bekijkt pagina 7 van 64
GB
7
BEFORE USE
FITTING THE CHARGER BASE
MOUNTING THE CHARGER BASE
It is recommended to charge the vacuum cleaner for at least 6 hours
for before use.
Read the following BEFORE wall mounting the charger base.
˙Before drilling any holes ensure that their position is away from
hidden cables and pipes.
˙Ensure that there is a reachable mains socket for the mains adapter.
˙Ensure the wall is strong enough to support the vacuum cleaner and
charger base plus the reasonable down force involved when insert-
ing and removing the vacuum cleaner.
˙There should be at least 300mm of free space above and 130mm
below the base to facilitate storage and removal of vacuum cleaner.
˙Choose a mounting location away from heat and dampness and out
of easy reach of children. Garages, workshops and indoor areas are
the ideal storage / charging places for the vacuum cleaner.
1. Drill 4 holes with a 5mm diameter drill, with distances 63mm width
and 50mm height.
2. Insert the supplied plastic anchors and then screw in the screws
with the 5mm end protruding.
3.
Hang the charger base onto the screws and then further tighten the
screws until the base is secured in place. Check if the power cable is
pinched as it should be passing through one of the recesses in the base.
1. Fit the adaptor plug into the charger base.
2. Turn the plug 90˚ anti clockwise to lock it in place. If needed, use the
clamp to assist the rotation of the plug.
Bekijk gratis de handleiding van Point POVC121GR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POVC121GR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3225 MB |
