Handleiding
Je bekijkt pagina 9 van 80
9
OPERATION
The first time you plug in, press the on/o switch, the appliance will
show 21°C at manual mode as factory default setting.
Pressing the button will switch the device on or o
If the button is in the down position, the device is on (1).
If the button is in the up position, the device is o (0).
1.
When the temperature of the environment is below the set temperature,
the heater will start to heat the room, otherwise, no.
The heating indicator icon will light on only when the product is heating up.
Temperature adjustment:
Press “+” or “–” to set temperature. Min. setting is 5°C, Max. is 35°C.
Pressing and holding “+” or “–” makes the adjustment faster.
In the event of a power failure, the heater will resume to work under the
same mode and set temperature after the power is resumed.
Short press OK to shift among the following modes: manual ( ), ECO,
P1, P2, P3, P4, (After flashing 5 seconds, the display will show set
temperature), OF.
Manual: the display will show NA, press “+” or “-” to select the
temperature manually.
ECO mode: the display will show EC, press “+”or“-” to select the
temperature manually.
P1-P4 mode: the default programs are as below. Among them, P1 to P3
are fixed pre-set programs while P4 is a free weekly personalized
program.
OF mode: the display show OF. During this mode, the appliance doesn’t
heat up but clock settings are maintained.
2.
3.
Power
switch
Bekijk gratis de handleiding van Point POPANW2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POPANW2000 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 4842 MB |
