Point POHS10PRO handleiding
Handleiding
Je bekijkt pagina 7 van 44
7
OPERATION
1.Filling water :
Ensure appliance is unplugged,Turn the water tank clockwise,separate it
from the Main body. (pic 1)Unscrewing the water tank cover(pic 2).then fill in
the water,Don't exceed the maximum water level.Then turn it to tight, match
it to the main body.
Note:Your appliance was designed to operate using pure demineralized
water.
Unscrewing the water tank cover
TIPS: CHECK THE FABRIC’S LABEL FOR RECOMMENDATIONS:
• We recommended that you test acrylic, nylon or other synthetic fabrics in
an inconspicuous area to ensure these fabrics are not damaged by hot steam
• As steam is very hot: never attempt to remove creases from a garment
while it is being worn, always hang garments on a clothes hanger.
2. Hang your garment on a clothes hanger.
3. Plug-in the appliance, push the power on, the power light is green flashing.
The appliance heat up. After 30s, the power light will be green lighting.it
means you can use the appliance now.
4.You can use the brush accessory to open better the weaves of the fabrics
for better steam effect. And you can use the anti-insulated cover too.When
you need, hold the appliance handle, with the other hand install fur brush to
iron head, and installed correctly.(see picture 3-6）
PIC 1 PIC 2
Bekijk gratis de handleiding van Point POHS10PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POHS10PRO |
| Categorie | Stoomreiniger |
| Taal | Nederlands |
| Grootte | 3694 MB |
