Handleiding
Je bekijkt pagina 6 van 47
10
11
GB
WARNING:
• For safety reason, use only the same size of fixing or
mounting screws which are recommended in this
instruction manual.
• Failure to install the screws or fix device in accordance
with these instructions may result in electrical hazards.
2. Drill a hole in the cabinet, with hole wide 496*265 (mm) for 52cm model and
hole wide 665*265 (mm) for 70cm model. Make sure the distance between
the edge of the hole and the edge of the cabinet is at least 35mm.
4. Fix the expansion pipe to the outlet with a cable tie and lead it to outside.
Then Install the aluminum filter. Note: The expansion pipe is not included in
the product. The expansion pipe with diameter of 150mm is suitable.
screwdriver to secure the screws and fix the hood body to the cabinet.
The min. thickness of hole wall should be 16mm, otherwise the fix screw
could not secure the hood on the cabinet.
496
562
665
562
52cm
70cm
1
2
Start Using Your Cooker Hood
Touch control with LED display
2. Press the button “Speed” time after time, the motor runs as low / mid /
high / low / mid…, the speed runs circularly; and the LED display will indicate
as 1-2-3-1-2… circularly.
4. When the hood is working, if press the “Timer” button, the hood will go into
the status of acquiescent working (acquiescent time is 9mins), and then, LED
display will be shown 9.8.7.6 ...decreasing by 1, when time is up, the hood will
the hood will go in or go out “Timer” function.
Timer
Lamp Speed
Power
Bekijk gratis de handleiding van Point POHO5070INTB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POHO5070INTB |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 6004 MB |
