Handleiding
Je bekijkt pagina 9 van 47
16
17
GB
BULB REPLACEMENT
The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
Always switch o the electricity supply before carrying
out any operations on the appliance. When handling
bulb, make sure it has completely cooled down before
any direct contact with hands.
When handling blubs, hold with a cloth or gloves to
ensure perspiration does not come in contact with the
blub as this can reduce the life of the blub.
Important :
Note:
• Before changing the lights, make sure that the appliance is turned o and
unplugged.
• Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
• Remove the grease filter.
• Find out the junction box, unscrew the screws on the junction box cover, then
take o the junction box cover (If there is a wire pressing plate which holds
the light wire, the wire pressing plate needs to be dismantled first). See pic 1.
• Find the terminal of the light connection wire and pull it out. See pic 2.
• Use a tool or your hands to press the spring splinter of both sides of the LED
light to the inside, until the light is pressed out, then slightly pull the light
connecting wire out. See pic 3.
• Apply the reverse procedure to reinstall the light.
ILCOS D code for this lamp is: DSR-1.5/65-S-64
– LED modules –round lamp
– Max wattage: 2*1.5W
– Voltage range: DC 12V
– Dimensions:
Specification:
Model No.: POHO5060TELB POHO5060TELW
Rated voltage: 220-240V~, 50Hz
Rated motor power: 60W
Lamp power: 2*1.5W
Total power: 63W
pic 1 pic 2
pic 3
Bekijk gratis de handleiding van Point POHO5060TELW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POHO5060TELW |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 6531 MB |
