Handleiding
Je bekijkt pagina 6 van 47
10
11
GB
WARNING:
• For safety reason, use only the same size of fixing or
mounting screws which are recommended in this
instruction manual.
• Failure to install the screws or fix device in accordance
with these instructions may result in electrical hazards.
3. The cooker hood is wall mounted by 4 screws (4mm x 30mm) and wall plugs.
Mount the cooker hood on the wall on the back of the cooker hood with 2
screws (4mm x 30mm) and wall plugs. Then fix the cooker hood on the wall
with 2 screws (4mm x 30mm) and wall plugs through the small L-shaped
bracket.
If there is gap between the wall and the cooker hood, you may install the
L-shaped bracket on the bottom of the hood with two screws (3 x 12mm).
The installation of the L-shaped bracket is optional.
Note: The expansion pipe is not included in the product.
2. Drill 6 Ø 6mm holes on the cabinet splint. And mount the cooker hood on the
cabinet with 6 screws (4x35mm) and flat washers. See pic 6.
INSTALLATION (Cabinet Mounting)
1. Fix the outlet to the cooker hood with 2pcs screws (ST4*8). Then fix the
expansion pipe on the outlet, and lead it to outdoors. See pic5.
4. Fix the outlet to the cooker hood.
pic 5
Bekijk gratis de handleiding van Point POHO5060TELB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POHO5060TELB |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 6531 MB |
