Handleiding
Je bekijkt pagina 9 van 62
GB
+ and - key
Sway key
Timing key
During operation, press the “+” or “-” keys to set the
working temperature. The temperature setting range is
5°C~35°C and every temperature value of 1°C between
the 2 values. The heater confirms and displays the set
temperature value if without operation within 3 seconds
after the setting. After the room temperature reaches
the set temperature, the display screen blinks for 10
seconds and the heating unit stops working; when
temperature is below the set temperature, machine
restarts to heat. In low warm wind, high warm wind, and
strong warm wind modes, it can be set to without
temperature control, the display will show “--”.
In power-on mode, press the timing key to select a
timed shutdown setting. The timing indicator lights up,
screen blinks and shows the rest time of the last
setting. Press “+” or “-” keys to set shutdown time, the
setting range is 0~24 hours. The machine confirms the
time and the quits the timing setting state if the timing
key is not pressed again within 5 seconds. If the set
time is 0, it heater cancelling the timing setting; if the
set time is not 0, the machine shuts down
timing icon when reaching the set time. Set the time
after time again setting, to retime the heater.
In idle mode, press the timing key to set the timing
power-on, following the same operation as timing
shutdown. The time unit of the timer is hour.
In power-on mode, press the sway key to start swaying,
and press again to stop swaying.
8
Bekijk gratis de handleiding van Point POHF60HC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POHF60HC |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 3653 MB |
