Handleiding
Je bekijkt pagina 11 van 62
Using the remote control
The remote controls keys: function is consistent with the heaters control
panel. Note: Strong warm wind mode can be opened by pressing the“ ”
key on the remote control.
Intelligent mode
In Intelligent mode, press the“+” and the“-” keys to set the required
temperature. When the environment temperature is lower than set
temperature (by more than 2°C), the heater heats in high warm wind
mode. When the environment temperature is close to the set temperature
(by less than 2°C or more), the heater heats in low warm wind mode. When
the environment temperature is higher than the set temperature, the
heater stops heating.
GB
Model <IEC>: LR03
Voltage <V>: 1.5
Dimension <mm>: Ø10*44
Capacity <mAh>: 1150
Type: dry battery
Material: zinc manganese
Troubleshooting
If the product does not operate or does not operate properly, first check
according to the following table. If the reason the product does not operate
or does not operate properly is not included in the following table, the
product may have failed. At this time, it is recommended to send the
product to the dealer for treatment.
Problem Possible Cause Solution
After the power is
engaged, the heater
does not work.
The plug may not be
plugged in well.
Check whether the plug
is properly inserted into
the wall socket.
The heater suddenly
stops during heating.
The temperature
exceeds the threshold
Cool the heater before
use.
READ AND SAVE THESE INSTRUCTIONS
10
Bekijk gratis de handleiding van Point POHF60HC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POHF60HC |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 3653 MB |
