Point POAP2010 handleiding
Handleiding
Je bekijkt pagina 5 van 22
98
GB
“PET MODE” BUTTON
Press this button the indicator light is on, and the air volume indicator light is o (
other indicators are not aected ). Enter the deodorization operation mode (
Turbo air volume operation for 15 minutes → III wind volume operation for 5
minutes → deodorization operation mode ends). The indicator light is o, and the
air volume indicator light is on.
“NIGHT LIGHT” BUTTON/ “SLEEP MODE” BUTTON
1. NIGHT LIGHT MODE: The default setting of the button is OFF. The first press,
the night light will open in high setting. The second press, the night light will open
in low setting. The third press, the night light operation is closed.
2. SLEEP MODE: Long press the button to turn on the sleep mode about flashing
three seconds. All the indicators including the night light are all o, and then the
wind speed is in I setting. If you want to close the mode, press any button (
including the power button) to turn o the SLEEP MODE. The unit will then return
to the previous setting before the sleep mode.
“UVC LAMP” BUTTON
Touch the button to turn on the function, and then press it again to turn o it.
“CHILD LOCK MODE” BUTTON
Long press the button for 3 seconds to turn on the mode, the CHILD LOCK MODE
indicator is on, and other functions cannot be operated. Press again for 3 seconds
to turn o the child lock function.
NOTE: When the Child Lock Function is turned on, all other functions can not be
operated except the CHILD LOCK FUNCTION. Long press the child lock button
for about 3 seconds to open and closed the function.
Important note: When the unit is not in use, switch it o and unplug it.
INSTALLING & REMOVING FILTERS
1. Unplug the unit, turn it upside down and place it on a flat surface
(preferably on a towel, blanket or soft cloth).
2. Unscrew the base removal screw and gently lift the base from the
unit.
3. Lift the old filter out and place the new replacement filter in the
same way.
Note: It doesn't matter which side the filter is facing.
4. Fit the base on the unit and screw it back on (do not over tighten).
CLEANING & MAINTAINING
THE COMBINATION FILTER
The air purifier 3-in-1 filter should be replaced about every 6 months. When it needs to
be replaced, the RESET BUTTON will remind you, and you just need to operate it
according to the directions.
NOTE:
- The Combination Filter is one filter system. The multiple layers include: the Pre-filter,
Activated Carbon Filter and HEPA Filter.
- It cannot be washed, just be replaced.
UV LAMP REPLACEMENT
1. Open the UV lamp cover with a screw driver.
2. Take o the UV lamp from the holder carefully and unplug the connector.
3. Connect the new UV lamp to the connector and fix back the lamp to the holder
carefully.
Note: Do not look at the operating UV lamp directly.
FILTERS
HEPA
Carbon filter
Pre-filter
Combination filter（Pre-filter+Carbon+HEPA）
Bekijk gratis de handleiding van Point POAP2010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POAP2010 |
| Categorie | Luchtreiniger |
| Taal | Nederlands |
| Grootte | 2635 MB |
