Handleiding
Je bekijkt pagina 49 van 56
49
3PCLIOB4K0PO
• Power management
The hob support power management to prevent the mains
connection from overloading. The power management is
prioritazing: the cooking zone which heating power has
been increasing at last will get the desired heating power,
and the other cooking zone will be reduced. The reduction
of power will be signaled to the operator by ashing OFF
of the cooking level (L zone) and the its power will be
reduced .
• Power settings
The power of the all hob can be set from its maximum up to
a minimum of 1.4 Kw, using a step of 100w (0,1Kw), until a
minimum of 1,4w by the user menu.
The User menu is intended for end customer to adapt the
Touch Control to his personal needs.
To enter in the User Menu, the command is in standby
mode, touch ON/OFF Command to power up the Touch
Item Meaning Changeable
Value
Format
Remark
U0 Max. power per line
conductor
Yes 2.4 ... 5 Setting the max. allowed power per
line conductor.
The max. power is dened inside
the service menu and can only be
reduced in steps of 0.1 kW until the
minimum power.
U1 Filter setting Yes 0,1,2 Filter changes:
0 - 150h (default)
1 - 300h
2 - 400h
U2 Volume for button
tones
Yes 0...3 Adjustment of the volume for button
tones
0: no button tones
1: min. volume
2: mid. volume
3: max. volume
Notes:
• For normative reasons, button
tones for switching ON and
OFF cannot be disabled. They
will be emitted with last volume
level which has been set before
disabling the button tones.
• Tones for errors are always
emitted with max. volume (set-
ting 3) and cannot be disabled
U3 Volume for signal
tones
Yes 0...3 Adjustment of the volume for signal
tones (ex: when timer runs out)
0: min. volume
...
3: max. volume
U4 Display brightness Yes 0...9 Adjustment of the brightness for the
display
0: Max. brightness
...
9: Min. brightness
Control. Touch the ON/OFF command again within 3 sec.
to set the Touch Control to standby mode again. Special
function Command starts pulsating (for 60 sec. max). The
menu is automatically exited after that. Press and hold
down pulsating the Command. Then press all cooking zone
selection Command in clockwise direction, starting with the
left front cooking zone selection Command. Skip cooking
zone selectrion Command which are not available.
In the following table there are described the implemented
user menu items:
Bekijk gratis de handleiding van Point PI7080, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | PI7080 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6487 MB |
