Handleiding
Je bekijkt pagina 47 van 56
47
3PCLIOB4K0PO
• Use:
Use the touch control system in the corresponding posi-
tion according to individual cooking needs. Keep in mind
that the higher the number, the more heat is produced.
The command offer a convenient handling as selections
are performed by touching directly on the display:
- the acitive selection is displayed with high intensity;
- avaible selections are displayed with a low intensity;
- unavaible selections are not lighted.
• Function (Fig.7):
A - On/Off key
B - Control Lock key
C - Pause/recall key
D - Keep warm key
E - Chef Cook
F - Timer level increment / Timer level decrement
G - Timer On
H - Power level setting display
I - Booster
L - Cooking zone display
• Switching the cooking top ON/OFF:
Touch A
key to switch the top on, the power led lights up.
The power levels for all cooking zones is 0 (the cooking
zone displays are OFF).
The cooktop switches OFF automatically after 20 sec.
if all cooking levels are set to 0 and no operation is
performed. To switch the appliance you have to just
touch the A Key. For safety reasons, switching OFF the
cooktop via the ON/OFF key is always possible.
• Pan detection:
This cooktop is tted with an interactive control system
that makes it very easy and comfortable to use. After
switching on the cooktop, when you put a cookware on
the glass, the control system automatically detects it, and
the display of relative cookzone shows 0. You then just
have to set the expected cooking level.
If you remove the pan on that cookzone, the display
shows .
• Switching the cooking area ON/OFF:
Put a cookware on the desired cooking zone and press
your nger on L keys zone. Then the command shows
the H zone. Press H key zone to go to position 9 (max.
power) or to go to position 1 (min. power).
The power
of the single cooking zone can be adjusted in 9 different
positions and will be shown on the relative luminous
display with a number from “1 to 9”.
To swicth OFF that cooking zone you have to press 0 in
the
H
key zone, and automatically the display of the zone
shows 0 (in the
L
key zone).
• Booster function:
The booster enables the induction to dissipate a higher
power for a cooking zone for a short period of time (5
min).
As the booster function may reach high temperatures, it
must only be used for cooking processes using water. Oil
or fat may start to burn if booster is used.
Choose the desire cooking zone L, then type the P
symbol on the H zone. The booster for the selected
cooking zone is activated, and now the relative display
shows P.
To remove the function, select a cooking level for the
cooking zone the booster function is currently active. The
booster function is terminated and the cooking zone is
heated with the new selected cooking level.
• Residual heat indication:
If the temperature of the cooking zone is still high (over
60°) after it has been switched off, the relative display
will indicate the H symbol (residual heat). The symbol will
only switch off when the burn risk is no longer present.
• Timer function:
There are 2 different types of timers. If ,more than one
timer is set, the timer will always display the lowest
remaining time. Both the timers can be adjusted within a
range of 1 min to 9 h 59 min.
• Stand alone Timer / Cooking zone Timers:
The Stand alone timer has the behavior of an egg timer.
To active this function, ensure that no cooking zone has
been selected, the timer show “--”, touch the timer, which
display 00 ashing for the next 10 sec. Adjust the desired
start time digit for digit +/- , do not perform any action
for about 5 sec. The timer starts counting backwards.
Beneath 10 min, the display shows the current time
accurate to the second. If it has reached 0, a signal tone
will be emitted. To change the value of the Stand-alone
timer, the user has to ensure that no cooking zone has
been selected, then touch the timer key, set the new
desired time, and nally after 5 sec, the timer starts
counting backwards starting with the new time. To disable
this function, rst of all ensure that no cooking zone has
been selected, then touch the timer key, the current time
value is displayed ashing, set the Stand-alone time
to”000”, at this point the funcion is deactivated.
The Cooking zone Timers can be used to switch a
cooking zone OFF automatically after the set time has
run out. To activate this function, the user can select
the corresponding cooking zone, touch the telative
Timer key G, then adjust the desired start time (+/-),
if do not perform any action for about 5 sec, the timer
starts counting backwards. To change the value of the
cooking zone timers, select the corresponding cooking
zone, touch the time, and set the new desired time (+/-
), do not perform any action for 5 sec., the the timer
starts counting backwards starting with the new time. To
disable this timer, the user have to set the cooking zone
time to “000”.
• Pause function:
Pause function is a feature to “freeze” the cooktop for
max. 10 min. For example, if the user is leaving the
cooktopfor a short period of time. During the pause
function is active, no cooking zone is dissipating
any power, and all timers (including egg timer) are
suspended, moreover the booster function and heat-up
automatic is stopped.
Bekijk gratis de handleiding van Point PI7080, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | PI7080 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6487 MB |
