Point PD6013XN1 handleiding
Handleiding
Je bekijkt pagina 26 van 33
EN - 22
7.1. Changing the Program
When you want to change the program
whilst a wash cycle is in progress.
Press Start/Pause button.
Once the program has stopped,
use the program selection button to
select the desired program.
Press the Start/Pause button to
start the newly selected program.
The newly selected program
will continue in the place of the
previous program.
7.2. Cancelling the Program
When you want to cancel the program while a washing
cycle is in progress.
Press and hold the Start/Pause
button for 3 seconds.
End light will flash during the cancelling
process. The machine will drain the
water inside for about 30 seconds.
After the End light has lit, press
the On/Off button
to switch off the machine.
Unplug the appliance. Turn
off the water tap.
NOTE: Do not open the door until the
program finishes.
NOTE: At the end of the washing pro-
gram, you can leave the door of the machine
ajar to speed up the drying process.
NOTE: If you open the door of the ma-
chine or if power gets cut during the washing
cycle, the program will resume once the door
has been closed or the power has recovered.
Bekijk gratis de handleiding van Point PD6013XN1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | PD6013XN1 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3578 MB |
