Handleiding
Je bekijkt pagina 7 van 62
Screw hole cover
Screw hole cover
Screw hole
Screw
Precautions before installation:
Information in the Instruction Manual is only for reference. The
Before installation and adjusting of accessories, ensure that the
freezer is disconnected from power.
Precautions should be taken to prevent fall of the handle from
causing any personal injury.
2.2 Door handle installation
1312
Precautions should be taken to prevent fall of the handle from
causing any personal injury.
Cross screwdriver
List of tools to be provided by the user
(The picture above is only for reference. The actual configuration will
depend on the physical product or statement by the distributor)
Assembly steps
a. Remove the screw hole caps ① from the door and use cross
screwdriver to fix screws ③ into the screw hole tightly.
b. Assemble the screw hole cap④on the screw hole of handle.
c. The reverse operation is for disassembly.
The freezer is to be placed in a well-ventilated indoor
place; the ground should be flat, and sturdy (rotate left or
right to adjust the wheel for leveling if unstable).
This freezer needs to be installed independently and
cannot be used as a built-in. Otherwise, it will cause
problems such as failure to install into the cabinet, the
performance and life of the product are reduced. And the
manufacturer does not provide basic product warranty.
The space above the freezer has to be over 30cm, and
the freezer should be placed against a wall with a free
distance more than 10cm to facilitate heat dissipation.
Spare enough space for convenient opening of the doors
and drawers or follow the instructions of the distributor.
Bekijk gratis de handleiding van Point FS490SNE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | FS490SNE |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 6819 MB |
