Planet LCG-350W-NR handleiding
Handleiding
Je bekijkt pagina 21 van 119
Industrial Outdoor LoRaWAN 5G NR Cellular Gateway
LCG-350W-NR
- 21 -
2.2.2 Wiring the Ethernet Cable Installation
As shown in the picture, put the network cable through the waterproof connector, and tighten the
connector. Plug the cable into the device's LAN port, and secure the waterproof connector to the
device.
Plug the other end of the network cable into the PoE port of the PoE switch to finish the installation.
Please make sure that the waterproof connector is securely fastened
with LoRaWAN Gateway to prevent internal water seepage.
2.2.3 Wall Hanging and Pole Mounting Installation
Wall hanging
Step 1: Lock the base to the device.
Step 2: Connect the wall bracket to the base and fasten the screws.
Step 3: Drill 4 holes with a 3mm diameter on the wall. The horizontal and vertical distances
between the 2 holes are 69.5mm and 45mm, respectively.
Step 4: Place four anchors inside the hole by hammering them. Then screw the four screws
leaving a space of 2mm apart as shown in the circled diagram below.
Bekijk gratis de handleiding van Planet LCG-350W-NR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | LCG-350W-NR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20336 MB |
