Planet IGS-820TF handleiding
Handleiding
Je bekijkt pagina 8 van 16
8
3.4 Wiring the Power Inputs
The terminal block connector on the top panel of Industrial Gigabit Ethernet Switch
is used for two DC redundant power inputs. Please follow the steps below to insert
the power wire by professionals.
When performing any of the procedures like inserting the wires or tight-
ening the wire-clamp screws, make sure the power is OFF to prevent
from getting an electric shock.
Lorsque vous effectuez l’une des procédures telles que l’insertion des
fils ou le serrage des vis de serrage, assurez-vous que l’alimentation est
coupée pour éviter tout choc électrique.
Insert positive and negative DC power wires into contacts 1 and 2 for POWER 1, or
contacts 3 and 4 for POWER 2.
DC Input: 9-48V
, 1A max.
AC Input: 24V
, 0.5A max.
V1+ V2+
PWR2PWR1
1 2 3 4
Figure 4: Power 1 and Power 2
This product is supplied with a UL-listed power adapter or power source, rated for
24V AC, 50/60Hz 1A (max.) or 9-48V DC, 1A (max.), with a maximum temperature
of of 75°C.
Tighten the wire-clamp screws for preventing the wires from loosening
1 2 3 4
Power 1 Power 2
+ - + -
Bekijk gratis de handleiding van Planet IGS-820TF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | IGS-820TF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1753 MB |
