Planet IGS-5225-4UP1T2S-12V handleiding
Handleiding
Je bekijkt pagina 296 van 519
User’s Manual of IGS-5225 series
296
Remote Loopback
Support
If status is enabled, DTE is capable of OAM remote loopback mode.
Link Monitoring
Support
If status is enabled, DTE supports interpreting Link Events.
MIB Retrieval Support
If status ie enabled DTE supports sending Variable Response OAMPDUs.
MTU Size
It represents the largest OAMPDU, in octets, supported by the DTE.
This value is compared to the remotes Maximum PDU Size and the smaller of
the two is used.
Multiplexer State
When in forwarding state, the Device is forwarding non-OAMPDUs to the lower
sublayer. Incase of discarding, the device discards all the non-OAMPDU's.
Parser State
When in forwarding state, Device is forwarding non-OAMPDUs to higher
sublayer.
When in loopback, Device is looping back non-OAMPDUs to the lower
sublayer.
When in discarding state, Device is discarding non-OAMPDUs.
Organizational Unique
Identification
24-bit Organizationally Unique Identifier of the vendor.
PDU Revision
It indicates the current revision of the Information TLV.
The value of this field shall start at zero and be incremented each time
something in the Information TLV changes. Upon reception of an Information
TLV from a peer, an OAM client may use this field to decide if it needs to be
processed (an Information TLV that is identical to the previous Information TLV
doesn't need to be parsed as nothing in it has changed).
Buttons
Click to refresh the page immediately.
Auto-refresh : Check this box to enable an automatic refresh. Automatic refresh occurs every 3 seconds.
Bekijk gratis de handleiding van Planet IGS-5225-4UP1T2S-12V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | IGS-5225-4UP1T2S-12V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 110731 MB |
