Planet IGS-5225-4UP1T2S-12V handleiding
Handleiding
Je bekijkt pagina 212 van 519
User’s Manual of IGS-5225 series
212
4.3.6 VCL
4.3.6.1 MAC-Based VLAN
The MAC address to VLAN ID mappings can be configured here. This page allows adding and deleting MAC-
based VLAN Classification List entries and assigning the entries to different ports.
Figure 4-3-6-1: MAC-based VLAN Members
The table bellows explains the items shown on this page.
Object
Description
Delete
To delete a MAC to VLAN ID mapping entry, check this box and press save. The
entry will be deleted in the stack.
MAC Address
Indicates the MAC address of the mapping.
VLAN ID
Indicates the VLAN ID the above MAC will be mapped to.
Port Members
A row of check boxes for each port is displayed for each MAC to VLAN ID
mapping entry. To include a port in the mapping, check the box. To remove or
exclude the port from the mapping, make sure the box is unchecked. By default,
no ports are members, and all boxes are unchecked.
Adding a New MAC to
VLAN ID mapping
entry
Click to add a new MAC to VLAN ID mapping entry. An
empty row is added to the table, and the mapping can be configured as needed.
Any unicast MAC address can be used to configure the mapping. No broadcast
or multicast MAC addresses are allowed. Legal values for a VLAN ID
are 1 through 4095.
The MAC to VLAN ID entry is enabled when you click on "Save". A mapping
without any port members will not be added when you click "Save".
The button can be used to undo the addition of new mappings.
The maximum possible MAC to VLAN ID mapping entries are limited to 256.
Bekijk gratis de handleiding van Planet IGS-5225-4UP1T2S-12V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | IGS-5225-4UP1T2S-12V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 110731 MB |
