Planet IGS-5225-4UP1T2S-12V handleiding
Handleiding
Je bekijkt pagina 180 van 519
User’s Manual of IGS-5225 series
180
4.3.2.2 Group
The Aggregation Group Configuration screen in Figure 4-3-2-3 appears.
Figure 4-3-2-3: Aggregation Group Configuration Page Screenshot
The page includes the following fields:
.Object
Description
Group ID
Indicates the group ID for the settings contained in the same row. Group ID "Normal"
indicates there is no aggregation. Only one group ID is valid per port.
Port Members
Each switch port is listed for each group ID. Select a radio button to include a port in an
aggregation, or clear the radio button to remove the port from the aggregation. By
default, no ports belong to any aggregation group.
Mode
This parameter determines the mode for the aggregation group.
Disabled: The group is disabled.
Static: The group operates in static aggregation mode.
LACP (Active): The group operates in LACP active aggregation mode. See IEEE
801.AX-2014, section 6.4.1 for details.
LACP (Passive): The group operates in LACP passive aggregation mode. See
IEEE 801.AX-2014, section 6.4.1 for details.
Revertive
This parameter only applies to LACP-enabled groups. It determines if the group will
perform automatic link (re-)calculation when links with higher priority becomes available.
Max Bundle
This parameter only applies to LACP-enabled groups. It determines the maximum
number of active bundled LACP ports allowed in an aggregation.
Buttons
: Click to apply changes
The IGS-5225-series supports non-PoE ports for link aggretation configuration..
Bekijk gratis de handleiding van Planet IGS-5225-4UP1T2S-12V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | IGS-5225-4UP1T2S-12V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 110731 MB |
