Planet GS-6322-48UP4X handleiding
Handleiding
Je bekijkt pagina 156 van 566
User’s Manual of GS-6322 Managed Switch Series
156
Figure 4-3-1-8: Mirror Configuration Page Screenshot
The page includes the following fields:
Object
Description
• Session
Select session id to configure.
• Mode
To Enabled/Disabled the mirror or Remote Mirroring function
• Type
Mirror
The switch is running on mirror mode.
The source port(s) and destination port are located on this switch.
Source
The switch is a source node for monitor flow.
The source port(s), reflector port are located on this switch.
RMirror destination
The switch is an end node for monitor flow.
The destination port(s) is located on this switch.
• VLAN ID
The VLAN ID points out where the monitor packet will copy to. The default VLAN ID is
200.
• Reflector Port
The reflector port is a method to redirect the traffic to Remote Mirroring VLAN. Any
device connected to a port set as a reflector port loses connectivity until the Remote
Mirroring is disabled.
In the stacking mode, you need to select switch ID to select the correct device.
If you shut down a port, it cannot be a candidate for reflector port.
If you shut down the port which is a reflector port, the remote mirror function cannot
work
• Source VLAN(s)
Configuration
The switch can supports VLAN-based Mirroring. If you want to monitor some VLANs
on the switch, you can set the selected VLANs on this field.
The following table is used for port role selecting.
Bekijk gratis de handleiding van Planet GS-6322-48UP4X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | GS-6322-48UP4X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 112059 MB |
