Planet GS-6322-48UP4X handleiding
Handleiding
Je bekijkt pagina 149 van 566
User’s Manual of GS-6322 Managed Switch Series
149
• Flow Control
When Auto Speed is selected on a port, this section indicates the flow control
capability that is advertised to the link partner.
When a fixed-speed setting is selected, that is what is used. The Current Rx
column indicates whether pause frames on the port are obeyed, and the Current
Tx column indicates whether pause frames on the port are transmitted. The Rx
and Tx settings are determined by the result of the last Auto-Negotiation.
Check the configured column to use flow control. This setting is related to the
setting for Configured Link Speed.
• Maximum Frame Size
Enter the maximum frame size allowed for the switch port, including FCS. The
allowed range is 1518 bytes to 10056 bytes.
• Excessive Collision
Mode
Configure port transmit collision behavior.
Discard: Discard frame after 16 collisions (default).
Restart: Restart backoff algorithm after 16 collisions.
• Frame Length Check
Configures if frames with incorrect frame length in the EtherType/Length field
shall be dropped. An Ethernet frame contains a field EtherType which can be
used to indicate the frame payload size (in bytes) for values of 1535 and below.
If the EtherType/Length field is above 1535, it indicates that the field is used as
an EtherType (indicating which protocol is encapsulated in the payload of the
frame). If "frame length check" is enabled, frames with payload size less than
1536 bytes are dropped, if the EtherType/Length field doesn't match the actually
payload length. If "frame length check" is disabled, frames are not dropped due
to frame length mismatch. Note: No drop counters count frames dropped due to
frame length mismatch
When setting each port to run at 100M Full-, 100M Half-, 10M Full-, and 10M Half-speed modes. The
Auto-MDIX function will disable.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the page. Any changes made locally will be undone.
Bekijk gratis de handleiding van Planet GS-6322-48UP4X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | GS-6322-48UP4X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 112059 MB |
