Handleiding
Je bekijkt pagina 57 van 104
Operating the Display
Planar Simplicity M Series User Manual
020-1409-00D
Page | 57
Power Save Mode
Select the standby behavior of the unit.
Options: Standby Mode, Networked Standby Mode, Wake on Signal, Always On
Default: Standby Mode
Standby Mode: Achieves the lowest standby power consumption and disables LAN and
RS232 functionality while in standby. The Scheduling feature will remain functional.
Networked Standby Mode: Supports waking the unit via Wake-on-LAN (WoL) but
disables RS232 functionality while in standby. The Scheduling feature will remain
functional.
Wake on Signal: The unit will enter a standby mode if no signal is detected. When a
signal is restored, the unit will quickly power on and display the image. This mode
supports the full LAN and RS232 command set while in standby mode.
o Note: Sending an OFF command via Keypad, IR, CEC, RS232 or LAN will
bypass Wake On Signal detection.
o Note: If Failover detection has been enabled, the unit will automatically search
for a signal on other inputs before entering standby.
Always On: This is the fast startup mode. An OFF command sent via Keypad, IR, CEC,
RS232 or LAN will place the unit into a standby mode that enables the fast startup. This
mode supports the full LAN and RS232 command set while in standby mode.
Note: Startup time can be reduced by performing one of the following actions:
o Disable the splash screen (see page 50)
o Select one of the following Power Save Mode settings: Wake on Signal, Always
On. These modes will forcibly set the splash screen to Off
Advanced Settings Reset
Resets all settings in the Advanced Settings menu to their default values
Bekijk gratis de handleiding van Planar SLM50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planar |
| Model | SLM50 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 18054 MB |
