PKM WT8+5BEG handleiding
Handleiding
Je bekijkt pagina 95 van 162
~ 95 ~
1x INSTRUCTION MANUAL
Before initial operation, please check that all components are present and that
they are not visibly damaged.
2.2 Unpacking / Site
1. Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
2. Completely remove the transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of the transport-protection.
3. Check that the appliance and the power cord are not damaged.
4. Do not install the appliance in a bathroom or a place where it may come in
contact with water or rain; otherwise, the insulation of the electrical system will
be damaged. Do not install the appliance in a room where explosive or flammable
gases are stored.
5. Protect the appliance from direct sunlight.
6. Install the appliance in a dry and well-ventilated place. The room temperature
must be higher than 0
°C.
7. The following minimum distances must be observed:
Back ↔ wall mind. 50 mm
Sides ↔ wall
mind. 50 mm
8. Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
9. Do not install the appliance on a carpet
/ fitted carpet.
10. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
11. If you install the appliance on a wooden floor, you must also place it on a
plywood panel (60.00*60.00 cm) at least 3.00 cm thick to distribute the weight
of the appliance. Fix and secure the plywood panel properly to the wooden floor.
Bekijk gratis de handleiding van PKM WT8+5BEG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PKM |
| Model | WT8+5BEG |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 28534 MB |
