PKM WA8-15TCA handleiding
Handleiding
Je bekijkt pagina 96 van 154
~ 96 ~
2. Attach the straight end of the water inlet hose to
the appropriate water connection (
s. fig. on the
right).
3. Put the other end of the water inlet hose into a
bucket or into another suitable container (s. fig on
the right) and open the water tap to flush foreign
substances (e.g., dirt, sand, etc.) out of the water
pipe and of the hose.
Check the water
temperature.
Fig. similar
4. Ensure that the rubber washer
38
is in the valve
connector. Attach the curved end of the water
inlet hose to the inlet valve of the washing
machine; s. fig. on the right / 1. Tighten the water
inlet hose firmly (clockwise) to avoid leakage (s.
fig. on the right / 2).
NOTICE! Do not overtighten the water inlet hose. Overtightening of the
water inlet hose can damage the valves.
NOTICE! After the installation of the water supply and wastewater disposal
as well as before the first operation, all water hose connections – even on
the appliance itself – must be checked for leakage. The manufacturer is
not liable for any damage caused by improper installation.
2.5.1 AquaStop
A
QUASTOP HOSE
39
: If an internal pipe or hose is damaged, a shut-off system
(AQUASTOP) is activated that interrupts the water supply to the appliance. In such
a case, the control glass (X) turns red (s. fig. below). Replace the water supply hose
immediately.
38
Depending on model.
39
Depending on model.
Bekijk gratis de handleiding van PKM WA8-15TCA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PKM |
| Model | WA8-15TCA |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 27191 MB |
