Handleiding
Je bekijkt pagina 68 van 82
~ 68 ~
« INCREASE » - SENSOR
❖ Use the « INCREASE » - SENSOR to increase the power level (motor speed) of the
extractor hood (see also chapter 4.2.1 POWER LEVELS).
« DECREASE » - SENSOR
❖ Use the « DECREASE » - SENSOR to decrease the power level (motor speed) of the
extractor hood (see also chapter 4.2.1 POWER LEVELS).
« ILLUMINATION » - SENSOR
❖ Use the « ILLUMINATION » - SENSOR to switch on / off the LED
ILLUMINATION of the extractor hood.
HOW TO SWITCH ON THE LED ILLUMINATION
1. Touch the « ILLUMINATION » - SENSOR once briefly to switch on the LED
illumination of the extractor hood.
2. The LED illumination is switched on.
HOW TO SWITCH OFF THE LED ILLUMINATION
1. Briefly touch the « ILLUMINATION »once again to switch off the LED
illumination of the extractor hood.
2. The LED illumination is switched off.
WARNING! The LED illuminant / illuminants must not be covered by
thermal insulation or other materials. RISK OF FIRE!
CAUTION! Do not touch the LED illuminant / illuminants within 30
minutes after using the appliance. RISK OF BURNS!
NOTICE! Only switch on the LED illumination while the appliance is
operating. Do not switch on the LED illumination to illuminate the room.
4.2.1 Power levels
❖ The extractor hood is equipped with 3 power levels (= 3 motor speeds).
❖ Use the SENSORS « INCREASE » and / or « DECREASE » to set the desired
power level (motor speed) of the extractor hood.
❖ The currently set power level (1 / 2 or 3) is indicated on the digital display « ».
Bekijk gratis de handleiding van PKM S8-60A++IXTW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PKM |
| Model | S8-60A++IXTW |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 12846 MB |
