PKM GSP12-4DFI handleiding
Handleiding
Je bekijkt pagina 91 van 144
~ 91 ~
A
INSTALLATION A: SINK
B
INSTALLATION B: DRAINPIPE, Ø min. 40 mm
1
BACK OF THE DISHWASHER
2
WATER INLET
3
WATER OUTLET
4
POWER CORD
5
WATER DRAIN HOSE
6
DRAINPIPE
7
SINK
8
WORKTOP
4. Fix the water drain hose properly, using a clamp (s. fig. below).
When installed to a fixed drain the water drain hose must be connected properly
to avoid any leaks.
When the sink is higher than 1000 mm the excess water cannot be drained
directly. Drain excess water in a suitable container which is held outside and lower
than the sink.
If the length of the water drain hose is not sufficient, apply to your authorised
service for an extension made from the same material as the original water drain
hose. The length of the water drain hose (including extension) should not
exceed 4 metres; otherwise, the performance of the appliance will be reduced.
Bekijk gratis de handleiding van PKM GSP12-4DFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PKM |
| Model | GSP12-4DFI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24942 MB |
