PKM GSP12-4DFI handleiding
Handleiding
Je bekijkt pagina 140 van 144
~ 140 ~
9.1 Error codes
Error codes are indicated by the corresponding LED combinations of the
LEDs 3, 4, 5 and 6 (s. fig. and table below).
E
RROR CODE
(LED COMBINATION)
MEANING POSSIBLE CAUSES
LED 4
flickers slightly
Long water inlet
time.
Tap is closed.
Water intake is restricted.
Water pressure is too low.
LED 3
flickers slightly
Water drain failure
Water drain hose is blocked.
Drainpipe is defective.
LED 3 and LED 4
flicker slightly
Required
temperature is not
reached.
Malfunction of the heating
element
Please contact the aftersales
service.
LED 6
flickers slightly
Overflow / leakage
An element of the appliance
leaks.
Please contact the aftersales
service.
LED 4, LED 5 and
LED 6 flicker slightly
Communication
error between main
board and display
board.
Short circuit / cable breakage.
Please contact the aftersales
service.
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, remove
the water before restarting the dishwasher.
Bekijk gratis de handleiding van PKM GSP12-4DFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PKM |
| Model | GSP12-4DFI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24942 MB |
