Handleiding
Je bekijkt pagina 28 van 38
28
K1: You can use this button to switch the interior lighting on and off. The
lighting must be switched off during normal use.
K2: Press the button once, the LED display flashes and shows the current
temperature.
Press again to set the temperature. Press once to increase the temperature
by one degree.
The flashing stops after 5 seconds without any action on your part and the
new desired temperature is recorded. The LED display then shows the
actual temperature inside.
L1: In normal use, the lighting must be switched off. The temperature can
be set between 2 °C and 18 °C depending on the cycle below (1 touch = 1
additional degree).
K3: Press the button once, the LED display flashes and shows the current
temperature.
Press again to set the temperature. Press once to lower the temperature by
one degree.
The flashing stops after 5 seconds without any action on your part and the
newly set temperature is saved. The LED display then shows the actual
indoor temperature.
K4: Press the button to switch the temperature display between Fahrenheit
and Celsius.
Bekijk gratis de handleiding van PKM GKS90CB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PKM |
| Model | GKS90CB |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5220 MB |
