Phonic PAA6 handleiding
Handleiding
Je bekijkt pagina 29 van 116
25
PAA6
English
Reverb Time (RT60)
The RT60 function gives the decay time of any signal. The decay time is the time that it takes for a signal
to diminish 60 dB below the original sound. This can be done with entirely no ltering (at weighting) or
with ltering imposed (A, B or C weighting). The RT60 calculations can also be made with no frequency
ltering active (meaning the reverb time will be calculated for all frequencies, 20 Hz to 20 kHz) or with
a 1 octave lter imposed (the frequency of which can be selected from 10 preset values).
Working out the average of many dierent RT60 readings from around a room allows users to get an idea
as to how much absorption or reection of audio the room provides. Depending on your needs, you may
wish to have a high or low RT60 measurement. For example, for public speaking, an RT60 measurement
of less than 1 second is preferable, as to have a clear, concise voice conveyed to the audience. With choirs
or instrumental music, an RT60 measurement of greater than 1.5 seconds may be appropriate.
Measuring Reverb Time:
1. Enter the RT60 function.
2. Select “RUN/STOP” to allow the PAA6 time to calculate the background noise (gure 37).
figure 36
figure 37
Bekijk gratis de handleiding van Phonic PAA6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phonic |
| Model | PAA6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 63483 MB |
