Phonic i2600 handleiding
Handleiding
Je bekijkt pagina 13 van 62

9
i2600
English       
6. Output[x]    [Name]   Limiter
         A:   5ms      R: 0.2s    +20dB
    -> A:   5ms      R: 0.2s    +20dB     [Atk time]  5ms    [Rel time]  0.1s            [Amp.]  -10.0 dB
                                             :                       :                                :
                                          200ms                     3.0s                        +20.0dB (OFF)
7. Output[x]    [Name]   Delay
          Delay =     0.000 ms
     -> Delay =     0.000 ms       PM1 N/A                   000.0000mS            000.0000mS
                                            [1 ms steps]                      [20.8 us steps]
                                            600.0000mS            000.9984mS
8. Output[x]    [Name]   Polarity
           Polarity =  Normal
      ->  Polarity =  Normal       PM1 N/A                   Normal                           Same as PM2
                                            Invert
9.  Output[x]    [Name]      HPF
           Y                 F =       20.0 Hz (Y = Bypass OR Filter Type/Order, where lter type can be Buttw_1st, Buttw_2nd,
              LRiley_2nd, Bessel_2nd, Buttw_3rd, Buttw_4th, Lriley_4th, Bessel_4th,
              Custom_2nd, Custom_3rd, Custom_4th)
     ->  Y                 F =       20.0 Hz     Freq Fast Selection  [Filt Type] Bypass            [Freq.]   20Hz
                         ONLY in Freq Editing Mode                    :                            :
                                                             Custom_4th         20kHz
       Through the PM2, it is possible to Bypass the lter or to select one of the 11 available 
       lters' type/orders, and through the PM3 to set the HP cutting Frequency (quick ne tuning by 1Hz steps).
       Once selected the lter Type and pressing again the ENTER button can be accessed the selected 
       lter's Fast Freq. Selection page.
9.1  Output[x]    [Name]      HPF
     ->  Y                 F =       20.0 Hz
9.1a. If you selected a lter from Buttw_1st up to Bessel_4th, then 
         the lter's Cutting Frequency can be set as follow:
         Output[x]    [Name]      HPF    [Thousands Editor]  [Hundreds Editor]            [Units Editor]
         -> Edit Freq = 250Hz       [Freq.]  1000Hz    [Freq.]     100Hz             [Freq.]       1Hz
                                         :                      :                                :
                                     20000Hz                    900Hz                            100Hz
9.1b. If you selected a Custom Filter (from 2
nd
 up to 4
th 
order), depending
         from the lter's order, the cascade of second order Cells building
         the lter are available for editing in their Freq and Q parameter, 
         indepndently.
         For proceeding with the editing of a custom lter Cell, the PM1 is 
         here used foir the Cell selection.
Bekijk gratis de handleiding van Phonic i2600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phonic | 
| Model | i2600 | 
| Categorie | Niet gecategoriseerd | 
| Taal | Nederlands | 
| Grootte | 9204 MB | 







