Phonic DMP8800D handleiding
Handleiding
Je bekijkt pagina 16 van 44
14
DMP8800
English
RM-2VR REMOTE LEVEL CONTROL
With a single RM-2VR you will be able to control up to 2
channels of the DMP8800 Digital Matrix Processor at a
single time� Up to four RM-2VRs can be utilized at any
one time to control all 8 outputs�
WIRING
The RM-2VR can be wired to the “Remote Level Control”
section on the rear of the Asystems DMP8800 digital
matrix processors�
As shown, there are pins for each of the devices’ 8 input
mixes in addition to a +5V power pin and a grounding
pin� Each of the 8 pins corresponds with the output mix
of the device you’re using� This being the case, for a
single RM-2VR to control channels 1 and 2, it should be
wired thusly:
Channel 2 Ground is internally
wired to channel 1 ground
SETUP AND OPERATION
To utilize the RM-2VR you will need
to activate the remote within the DMP
software� At the bottom of each channel
within the “Control Panel” window you
will be able to find an on/off button for the
Remote level control� You will also be
able to view the remote level in the virtual
rotary control found directly below this
button�
DMP8800
Do not connect the RM-2VR grounding
pins to any other external grounds�
Bekijk gratis de handleiding van Phonic DMP8800D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phonic |
| Model | DMP8800D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9601 MB |
