Phonic DMP8800D handleiding
Handleiding
Je bekijkt pagina 13 van 44
11
DMP8800
English
Compressor Attack: This control adjusts the attack
time of the compressor, essentially determining the time
taken for the compressor to kick in after it passes the
selected threshold�
Compressor Release: The release control determines
the time the DMP8800 will wait before disengaging the
compressor when the signal bypasses the selected
threshold�
Side Chain HPF: This allows users to set a high pass
lter on these channels to essentially help rid these
channels of low-frequency noise�
System
System Clock: This menu allows you to select a master
clock source for digital devices� Selecting 44�1 or 48
kHz will set the DMP8800 as the master clock source
and determine the sampling rate� Selecting AES/EBU,
Network, or Word Clock will set these as the master
clock� Whenever a new clock source is selected, the
ENTER button must be pushed to conrm.
Power Settings: There are three power settings on the
DMP8800� The software power can be turned on and off,
essentially enabling the DMP8800 to be turned on and
off via the software – including event scheduling� The
hardware power can be selected on and off, essentially
allow the unit to be activated and deactivated using the
hardwired switch on the front of the DMP8800�
Relay (GPIO)
The GPI – or General Purpose Interface – output is used
to remotely control the Asystems DMP8800� The relay
page itself is used to setup the GPIs, including any and
all remote controls connected to the unit� More detailed
information on this will be provided at a later date�
RM Control
This page offers a number of assignment options for the
optional Asystems RM remote controls� More detailed
information on this can be found later in this manual
Utility
All of the DSP processes can have their settings saved
for later use� While there are a number of factory presets
available, users are always encouraged to nd their own
settings and save them for later use� The DMP8800 has
onboard storage for a number of settings to be saved,
or users can connect USB ash drives to save settings.
Also available in the Utility menu is a rmware update
button. When a new version of rmware is available it
can be installed using the “Update” button� Place the
rmware update le on a formatted USB ash drive and
insert it into a USB port� The “Update” button should
take care of the rest. After the rmware is updated, the
initialize button can be selected to reset the device� Save
any settings (or “scenes”) before initializing the system.
Bekijk gratis de handleiding van Phonic DMP8800D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phonic |
| Model | DMP8800D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9601 MB |
