Phonic DMP808 handleiding
Handleiding
Je bekijkt pagina 22 van 56
20
English
DMP808 / DMP808D
RM-4 PRESET RECALL REMOTE
With a single RM-4 you will be able to recall up to 4
independent presets.
WIRING
The RM-4 can be wired to the “Preset” section on the
rear of the DMP808.
As shown, there are pins for each of the 4 preset buttons
on the RM-4, as well as a grounding pin. Each of the 4
pins corresponds with a user-selected “Scene” within the
control software.
Suggested wiring:
SETUP AND OPERATION
To utilize the RM-4, you simply need to assign a preset
to each of the buttons. This is done within the Control
Software of the DMP 808. First, enter the “Global
Settings” menu and find the GPIO submenu. Here you
will find the “Preset” panel (shown below). Each of the
pins on the rear of the device will correspond to the Ports
listed here. You can then select which “Scene” (or preset)
you wish to assign to that port.
The pre-saved scenes are all listed within the Utility
menu. Scenes can be saved (and recalled) in this
menu. The “No” in the Preset window on the GPIO
page will correspond with the ‘Scene’ numbers found
here. The Subject in the Preset window will be updated
automatically.
A single preset can be recalled at any one time. The
button selected on the RM-4 will lock down, releasing
any other preset button that may have previously been
selected.
DMP808 RM-4
Bekijk gratis de handleiding van Phonic DMP808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phonic |
| Model | DMP808 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11121 MB |
