Phoenix Gold ZDT-HYKI3 handleiding

Handleiding

12/ 2

Afdrukken

Je bekijkt pagina 2 van 2

Remove the OEM Head Unit

OEM Head Unit

Remove the OEM Connector from the

Head Unit

STEP 1

STEP 2

OEM Head Unit

OEM

Head Unit

OEM

Head Unit

ZDT Harness

ZDC Harness

1. Connect the ZDT harness to the rear of the OEM head unit.

2. Connect the ZDT harness to the ZDC harness as shown in the above diagram.

3. Run the ZDC harness from behind the OEM head unit through the back of the dashboard to the

location of where you will position your amp. We would advise installing the ZDA amp under the

seat or in the boot of the vehicle.

NOTE: The information show above is a guide ONLY to installing the ZDA Amp under the passenger seat. Please be

advised that we would also recommend a trained professional auto electrician carry out the install of any of our products.

STEP 3

ZDA Amplifier

OEM Harness

Shown in Fig. 2

INSTRUCTION MANUAL

Example: Install under front seat

PHOENIXGOLD.COM

OEM Harness

Prior to installation the vehicle battery should be disconnected so no power is running to

any of the electrics in the vehicle.

12/ 2

Bekijk gratis de handleiding van Phoenix Gold ZDT-HYKI3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd