Phoenix Contact SCK-M-U-1500V handleiding
Handleiding
Je bekijkt pagina 46 van 128
SOLARCHECK family
46
PHOENIX CONTACT 105608_en_01
Figure 6-3 Installation of the data cables
When installing the cables, note the following:
– Do not install the data cables in direct proximity and in parallel to the power cables
(see Figure 6-1 on page 44), but install them in separate grounded metal cable ducts
with a cover, for example.
– Always install the data cables as close as possible to grounded metal parts, such as
housing panels.
– Data cables and power cables may only cross at a right angle (see Figure 6-3 on
page 46).
– Avoid unnecessary cable lengths (antenna effects).
– For connection to ground, use suitable shield-connection clamps, such as the
SK 35-D shield-connection clamp (item no. 3026890).
– For the shield connection to GND2 of the communication module, use suitable shield-
connection clamps, such as the ME-SAS shield-connection clamp (item no. 2853899).
– Remove the shielding only a few centimeters before the connection terminal block on
the device.
– Untwist the twisted pairs only a few centimeters before the connection terminal block
on the device.
•
•
P
D
D
Bekijk gratis de handleiding van Phoenix Contact SCK-M-U-1500V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phoenix Contact |
| Model | SCK-M-U-1500V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11551 MB |
