Phoenix Contact SCK-M-I-4S-20A handleiding

Niet gecategoriseerd

Phoenix Contact

128 pagina's

PDF beschikbaar

Handleiding

SOLARCHECK family

PHOENIX CONTACT 105608_en_02

1.3 General safety notes

• Installation, operation, and maintenance may only be carried out by qualified electricians.

Follow the installation instructions as described.

• When installing and operating the device, observe the applicable regulations and safety

directives (including national safety directives), as well as the generally recognized

technical regulations.

• Observe the safety information, conditions, and limits of use specified in the product

documentation. Comply with them.

• The devices are only to be used as described here. Phoenix Contact accepts no liability

if used for anything other than the intended purpose. Any use other than the intended

use may lead to malfunction or irreversible damage of the devices.

• The termination area must be covered after installation to ensure sufficient protection

against accidental contact with live parts (e.g., installation in a distributor box or control

cabinet).

• In a photovoltaic system, the inverter’s method of operation may generate AC voltage com-

ponents and transients on the DC side. This may lead to inductive interference of cables

and devices in the proximity of the generator’s DC cabling.

• In the case of UL applications, observe the wiring methods of the National Electric

Codes, ANSI/NFPA 70.

• If the device is not used as described in the documentation, the intended protection

may be impaired.

• The devices described in this document are for use in manufacturing industry environ-

ments. They are not designed for use in private environments. They are class A devic-

es. These devices are class A items of equipment (EN 61000-6-4).

• When using the equipment in residential areas, it may cause radio interference. In this

case, the operator is obligated to implement appropriate measures.

• The installer of the system is responsible for the safety of the system in which the device

is installed.

The symbol with the crossed-out trash can indicates that this item must be collected

and disposed of separately. Phoenix Contact or our service partners will take the item

back for free disposal. For information on the available disposal options, visit phoenix-

contact.com. Collect and dispose of included batteries separately from other waste.

Delete personal data before returning the item.

NOTE: Electrostatic discharge

The devices contain components that can be damaged or destroyed by electrostatic

discharge. When handling the device, observe the necessary safety precautions

against electrostatic discharge (ESD) in accordance with EN 61340-5-1 and

EN 61340-5-1.

NOTE: Degree of protection

The IP20 degree of protection (IEC 60529/EN 60529) of the devices is intended for use in

a clean and dry environment. Install the module in a housing with at least IP54 degree of

protection in accordance with EN 60529. The stated limits concerning mechanical or ther-

mal loads on the modules must not be exceeded.

WARNING: Risk of fatal electric shock

Do not install the voltage measuring device while the system is in operation. High volt-

ages may be present in parts of the system even in diffuse daylight. Observe all stat-

utory requirements for working on live parts.

Bekijk gratis de handleiding van Phoenix Contact SCK-M-I-4S-20A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.