Phoenix Contact QUINT4-PS/3AC/24DC/20 handleiding
Handleiding
Je bekijkt pagina 31 van 36
Control Input
107309_en_02 PHOENIX CONTACT 31 / 36
9.2 Closed active
If the Closed active radio button is activated, the power supply is switched on if:
– You connect a resistor less than 1.5 k between signal contacts Rem and SGnd
– Signal contacts Rem and SGnd are short circuited or
– A voltage source is connected between signal contacts Rem and SGnd which supplies
a voltage in the range from 0 V to 5 V DC
Figure 9-4 Closed active – power supply ON
The power supply can then be switched off on the secondary side if:
– You connect a resistor greater than 1.5 k between signal contacts Rem and SGnd
– Signal contacts Rem and SGnd are open or
– A voltage source is connected between signal contacts Rem and SGnd which supplies
a voltage in the range from 10 V to 24 V DC
Figure 9-5 Closed active – SLEEP MODE
Bekijk gratis de handleiding van Phoenix Contact QUINT4-PS/3AC/24DC/20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phoenix Contact |
| Model | QUINT4-PS/3AC/24DC/20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3051 MB |
