Phoenix Contact QUINT4-PS/3AC/24DC/20 handleiding

Niet gecategoriseerd

Phoenix Contact

36 pagina's

PDF beschikbaar

Handleiding

QUINT POWER Software

14 / 36

PHOENIX CONTACT 107309_en_02

5.3 Removing write protection

If you wish to remove the write protection, proceed as follows:

1. Enter the password in the “Enter password” input field.

2. To deactivate write protection, click on the “Disable write protection” button.

3. Transfer the set data to the power supply (see Section 4.7, “Writing data”).

5.4 Forgotten your password?

If you have forgotten your password, proceed as follows:

1. In the main menu, click on the “Read” button. The green CONN LED signals that the

adapter is ready for operation.

2. Hold the TWN4 MIFARE NFC USB ADAPTER in front of the NFC symbol on the power

supply. Communication is established automatically and signaled by the flashing red

DAT LED. The software reads the parameters of the power supply and visualizes them

on your PC.

3. In the menu bar, open “Settings, Options”.

4. Activate the “Write memory dump file” check box.

5. Save your settings. Under “Path of Log-Files” select a storage location on your PC. To

do this, click on the “...” button.

6. Click the “OK” button to exit the “Settings, Options” menu.

7. In the main menu, click on the “Write” button. The following window opens on your mon-

itor:

Figure 5-2 Note about password entry

8. Click on the arrow button (). This takes you back to the main menu. There is now a

.mem file in the storage location you selected for the log file.

9. Send this file by e-mail to: DE-PS-Support@phoenixcontact.com

Bekijk gratis de handleiding van Phoenix Contact QUINT4-PS/3AC/24DC/20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.