Phoenix Contact PSR-M-EF1-XC-SDI8-SDO4-DO4-PI handleiding

Niet gecategoriseerd

Phoenix Contact

40 pagina's

PDF beschikbaar

Handleiding

Graphical user interface of PSRBusConf

110761_en_00 PHOENIX CONTACT 7 / 38

2 Graphical user interface of PSRBusConf

Proceed as follows to configure the PSR-M-GW... module:

1. Connect the module to the 24 V DC +20% power supply via the connection terminal

block.

2. Connect the USB cable with the PC and with the PSR-M-GW... module.

3. Double-click the “BusConf” icon on your desktop.

4. Press the “Connect” button.

5. The configuration window appears.

Figure 2-1 Graphical user interface (GUI) – PSRBusConf

6. The application detects that a PSR-M-GW... module is connected and the status bar

displays the following:

a) Bus module (PSR-M-GW... automatic diagnostics of connected gateway)

b) Firmware version (firmware of PSR-M-GW...)

c) CRC of circuit diagram (CRC of entire project)

d) Master status (firmware of connected base module PSR-M-B1 or PSR-M-B2)

The LED in the bottom right corner shows status of the connection with the PSR-M-GW...

module:

Gray PSR-M-GW is not connected

Orange PSR-M-GW sends/receives the configuration

Green Master is active (base module status is RUN)

Red Master is not active (e.g., base module is not connected)

Bekijk gratis de handleiding van Phoenix Contact PSR-M-EF1-XC-SDI8-SDO4-DO4-PI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.