Phoenix Contact MINI MCR-2-I-I-ILP Handleiding (58 Pagina's)

Handleiding

Supply options for MINI Analog Pro

105810_en_02 Phoenix Contact 27 / 56

Then determine the maximum total current consumption of all eight modules.

The total current consumption of 201 mA is less than the maximum permissible current

for supply via a module. The fuse to be connected upstream of the supply signal

conditioner should have a nominal current of 500 mA. To ensure that the fuse definitely

trips in the event of a short circuit, the 24 V DC supply in this example is provided by a

QUINT4-PS/1AC/24DC/3.8/SC (item no. 2904599). The structure is shown in

Figure 4-2 on page 27. The wiring is as shown in Figure 4-1 on page 26.

Figure 4-2 Example for direct supply via a module

In addition to the low maximum number of modules, a disadvantage of this method of

supply is that fault monitoring is not possible. However, this function is provided by the

method of supply described in the next section.

       





     

 





QUINT4-PS/1AC/24DC/3.8/SC

UT 4-HESILED 24 (5X20)

MINI MCR-2-TC-UI

MINI MCR-2-UI-UI

MINI MCR-2-TC-UI

Bekijk gratis de handleiding van Phoenix Contact MINI MCR-2-I-I-ILP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.