Phoenix Contact ILC 131 ETH handleiding
Handleiding
Je bekijkt pagina 13 van 190
The Inline product range
6452_en_10 Phoenix Contact 13 / 188
3.2 Product description
Automation terminals with various functions are available within the Inline product range.
With just a few exceptions, the automation terminals consist of an electronics base (Inline)
or an electronic module (Inline Block IO) and one or more connectors for connecting the I/O
or power supply. The electronics can be replaced without removing a single wire from the
connector.
Inline versions The Inline product range offers terminals for all automation tasks:
– Bus couplers to integrate the Inline station into various bus systems, some with input
and output function for digital signals
The bus can be connected using copper or fiber optic technology.
– Terminals with remote bus branch for opening an INTERBUS remote bus branch
The remote bus branch can be connected using copper or fiber optic technology.
– Terminals for supplying the supply voltages and segmenting the station (with and
without fuse)
– Accessory terminals (potential distributor terminals, distance terminals)
– Input and output terminals for digital and analog signals
– Power-level terminals for switching, protecting, and monitoring three-phase standard
motors
– Branch terminals for integrating further product ranges (e.g., integration of a Fieldline
Modular local bus in the Inline station) or to extend the local bus by several rows
– Terminals for open and closed-loop control, communication, and position detection
– Safety modules
– Programmable terminals (CPU and Inline Controller)
Inline Block IO versions – Input modules, output modules, and I/O modules for digital and analog signals
– Bus interface is integrated in the module
Mounting location Inline terminals and Block IO modules meet IP20 protection. They can be used in closed
control cabinets or in control boxes (terminal boxes) with IP54 protection or higher
according to EN 60529. The compact design means that most Inline terminals and all
Block IO modules can be installed in standard terminal boxes.
Please observe the mounting distances when selecting the housing (see Section “Mounting
distances” on page 103).
Mounting Inline terminals and Block IO modules can be snapped onto DIN rails without tools. Potential
and data jumpers are automatically created when the Inline terminals are properly installed.
See Section “Mounting/removing devices” on page 100.
Bekijk gratis de handleiding van Phoenix Contact ILC 131 ETH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phoenix Contact |
| Model | ILC 131 ETH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17704 MB |
