Phoenix Contact IFS-CONFSTICK handleiding
Handleiding
Je bekijkt pagina 11 van 66
2 Software setup
The UPS-CONF software has to be installed on a PC in order to configure and monitor an
UPS system. If the buffered load is a PC, the UPS can be operated in the PC-Mode to
additionally enable the automatic PC shutdown and restart functionality.
To setup the software, the following steps have to be executed:
1. Make sure all system requirements (see page 4) for the hardware and software are
met.
2. Download and install the software (see page 5).
3. Follow the steps in the hardware setup (see page 11).
4. Start the software (see page 15).
5. Become familiar with the software settings (see page 5) supported by the UPS-CONF
software and carry out the required settings.
Software setup
104779_en_01
PHOENIX CONTACT
3
Bekijk gratis de handleiding van Phoenix Contact IFS-CONFSTICK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phoenix Contact |
| Model | IFS-CONFSTICK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8166 MB |
