Phoenix Contact IB IL AO 4/U/0-10-ECO Handleiding (190 Pagina's)

Handleiding

Je bekijkt pagina 78 van 190

IL SYS INST UM E

78 / 188 Phoenix Contact

6452_en_11

Additional labeling In addition to this connector marking, you can identify the slots, terminal points, and con-

nections using Zack marker strips and labeling fields.

Figure 7-7 Labeling

Various options are available for labeling the slots and terminal points:

1 Each connector can be labeled individually using Zack marker strips.

2/3 Another option is to use a labeling field. Labeling fields are available in two widths,

either as a labeling field covering one connector (2; IB IL FIELD 2) or as a labeling

field covering four connectors (3; IB IL FIELD 8). You can label each channel

individually with free text. On the upper part of the connector there is a keyway for

attaching this labeling field. The labeling field can be tilted up and down. In each

end position a light latching ensures that the labeling field remains in place.

4/5 Each signal can be labeled individually using Zack marker strips. On a double

signal connector, the upper keyway (4) is designed for labeling signals 1 and 2 and

the lower keyway (5) is for signals 3 and 4.

6 On the electronics base, each slot can be labeled individually using Zack marker

strips. These marker strips are covered when a connector is plugged in.

Using the marker strips on the connector and on the electronics base, you can clearly as-

sign both connector and slot.

Insert strips for use with a laser printer are available for insertion in the IB IL FIELD 2 and

IB IL FIELD 8 labeling fields.

The components required for marking are listed on the item page at

phoenixcontact.com/products

.

1

2

3

4

D

DI 4

1

2

3

4

5

6

Bekijk gratis de handleiding van Phoenix Contact IB IL AO 4/U/0-10-ECO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.