Phoenix Contact IB IL AO 4/U/0-10-ECO Handleiding (190 Pagina's)

Handleiding

Je bekijkt pagina 73 van 190

Inline connectors

6452_en_11 Phoenix Contact 73 / 188

7.2 Connectors for the 24 V DC area

Connector types The following connector types are available for the 24 V DC area:

Figure 7-3 Connector types for Inline terminals

A Standard connector

The green standard connector is used for the connection of two signals in 4-wire

technology or 8 signals in 1-wire technology (e.g., digital I/O signals).

The black standard connector is used to supply the supply voltage. Some of the

adjacent contacts can be jumpered internally (see Figure 7-4 on page 74).

B Shield connector for connecting one cable

C Shield connector for connecting two cables

Green connectors B and C are used for signals connected using shielded cables

(e.g., analog I/O signals, high-frequency counter inputs, remote bus cable).

FE or shielding is connected via a shield connection clamp rather than via a

terminal point.

D Extended double signal connector

The green double signal connector is used for the connection of four signals in 3-

wire technology (e.g., digital I/O signals).

The black double signal connector is used to supply the supply voltage. Some of

the adjacent contacts can be jumpered internally (see Figure 7-4 on page 74).

A B C D

Bekijk gratis de handleiding van Phoenix Contact IB IL AO 4/U/0-10-ECO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.