Phoenix Contact IB IL AO 4/U/0-10-ECO handleiding

Niet gecategoriseerd

Phoenix Contact

190 pagina's

PDF beschikbaar

Handleiding

Je bekijkt pagina 14 van 190

IL SYS INST UM E

14 / 188 Phoenix Contact

6452_en_11

3.3 Product description

Automation terminals with various functions are available within the Inline product

range.

With just a few exceptions, the automation terminals consist of an electronics base

(Inline) or an electronic module (Inline Block IO) and one or more connectors for con-

necting the I/O or power supply. The electronics can be replaced without removing a sin-

gle wire from the connector.

Inline versions The Inline product range offers terminals for all automation tasks:

– Bus couplers to integrate the Inline station into various bus systems, some with input

and output function for digital signals

The bus can be connected using copper or fiber optic technology.

– Terminals with remote bus branch for opening an INTERBUS remote bus branch

The remote bus branch can be connected using copper or fiber optic technology.

– Terminals for supplying the supply voltages and segmenting the station (with and

without fuse)

– Accessory terminals (potential distributor terminals, distance terminals)

– Input and output terminals for digital and analog signals

– Power-level terminals for switching, protecting, and monitoring three-phase stan-

dard motors

– Branch terminals for integrating further product ranges (e.g., integration of a Field-

line Modular local bus in the Inline station) or to extend the local bus by several rows

– Terminals for open and closed-loop control, communication, and position detection

– Safety modules

– Programmable terminals (CPU and Inline Controller)

Inline Block IO versions

(no longer in product

range)

– Input modules, output modules, and I/O modules for digital and analog signals

– Bus interface is integrated in the module

Mounting location Inline terminals and Block IO modules meet IP20 protection. They can be used in closed

control cabinets or in control boxes (terminal boxes) with IP54 protection or higher ac-

cording to EN 60529/ IEC 60529. The compact design means that most Inline terminals

and all Block IO modules can be installed in standard terminal boxes.

Please observe the mounting distances when selecting the housing (see Section “Mount-

ing distances” on page 107).

Mounting Inline terminals and Block IO modules can be snapped onto DIN rails without tools. Po-

tential and data jumpers are automatically created when the Inline terminals are properly

installed.

See Section “Mounting/removing devices” on page 105.

Bekijk gratis de handleiding van Phoenix Contact IB IL AO 4/U/0-10-ECO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.